© 2019 Jinding waterproof technology All rights reserved. 鲁ICP备13022271号-2 Powered by www.300.cn
WATERPROOFING MEMBRANE MANUFACTURER
How to remove impurities on aluminium bitumen flashing tape
When using aluminum bitumen flashing tape for construction, the use effect has a lot to do with the construction method. Therefore, pay more attention to the construction. The asphalt anti-corrosion tape used for pipeline anti-corrosion will have impurities. The methods to remove the impurities on the aluminum bitumen flashing tape are as follows:
1. When using aluminum bitumen flashing tape for construction, you need to clean the rust on the pipe surface first, and apply a layer of primer on the surface to wrap the tape.
2. When winding aluminum bitumen flashing tape, rotate at a certain speed and control a certain tension so that the tape is evenly wound on the pipe.
3. In order to reduce the generation of impurities, the cleanliness of the construction environment must be ensured during construction, and the connection before and after construction must be done, and not too long is wasted in between.
If you want to remove the impurities on aluminum bitumen flashing tape, the above three methods can be used. I hope to help you in the construction. If aluminum bitumen flashing tape is used in the construction, please contact our company.