How to use sbs bitumen waterproof membrane

SBS modified bitumen waterproofing membrane has good high temperature resistance and can be used in the temperature range of -25°C to +100°C. The polymer-modified asphalt waterproofing membrane is modified by adding rubber or plastic resin to the asphalt. Due to the low softening point of the asphalt itself, the scope of use is limited when it is used as a waterproofing material. Here's how to use it.

How to use sbs bitumen waterproof membrane?
1. Fire-baked waterproofing membrane, the first few steps: cleaning the base layer--painting the primer--after drying, lay the coil--cut off the excess coil--heat the coil with a spray gun and a blowtorch material.
2. The sbs bitumen waterproof membrane is cold construction, no need to use an open flame or adhesive
3. Non-cured rubber asphalt plus sbs waterproof membrane, if you want to form a composite waterproof layer, this is a method.
The above is the use method of sbs bitumen waterproof membrane, I hope to help you.