WATERPROOFING MEMBRANE MANUFACTURER
How to use sbs bitumen waterproof membrane products
sbs bitumen waterproof membrane is widely used in waterproof projects such as roofing, basement and toilet of industrial and civil buildings, as well as waterproof and moisture-proof of roof gardens, roads, bridges, tunnels, parking lots, swimming pools and other projects.
Before the construction of sbs bitumen waterproof membrane, the defects of the base layer should be cleaned up, the moisture content of the base layer should not be greater than 9%, and the special base oil should be painted and fully dried before construction. The specific project construction and detailed structure shall be carried out in accordance with the project's waterproof design, acceptance standards and construction specifications.
How to use sbs bitumen waterproof membrane:
1. The base layer is required to be dry, flat, clean, free of dust, debris, oil, and moss. If there are holes, holes, and cracks, it should be filled with cement mortar, and the protruding parts should be chiseled.
2. The sbs bitumen waterproof membrane should be brushed with the base treatment agent against the wind.
3. Apply adhesive on the surface of the base layer and the surface of the coil, and reserve the lap edge to apply the joint glue.
4. Lay the coil, exhaust and compact it.
5. Paste the lap seam.
The above is the use method of sbs bitumen waterproof membrane products, I hope to help you.