© 2019 Jinding waterproof technology All rights reserved. 鲁ICP备13022271号-2 Powered by www.300.cn
WATERPROOFING MEMBRANE MANUFACTURER
What should I pay attention to when using Butyl waterproof tape
The main raw material of Butyl waterproof tape is butyl rubber, which is produced through a special process. It is a relatively advanced waterproof material and is widely used in our lives. But there are still many people who don't know how to use it. The editor will tell you what to pay attention to when using Butyl waterproof tape.
What to pay attention to when using Butyl waterproof tape:
1. When using Butyl waterproof tape, be sure to control the temperature. Generally, the temperature of the construction site is required to be between minus 15 degrees and 45 degrees. The construction personnel should take corresponding measures. When we use Butyl waterproof tape, the temperature of the construction surface should be above five degrees to ensure its bonding effect.
2. We should choose different operation methods, different waterproofing membranes, and different specifications, sizes and types of tapes according to the actual needs of the construction surface. Can not be used indiscriminately, be sure to choose its specifications, sizes and models.
3. When we use Butyl waterproof tape, we must open a circle of tape in the opposite direction before we can use it normally, because the adhesive tape is very sticky, and if we open it in the right direction, it will get into our hands.
4. The Butyl waterproof tape manufacturer tells you that the surface to be constructed must be kept clean and dry, and there should be no oil, dust, water stains, etc. on it. Wipe it repeatedly with a rag, and pay attention to whether the surface of the concrete or brick wall is bonded. Flat and firm.