HDPE membrane for basement,pre-applied HDPE membrane

• Forms a unique integral seal to concrete poured against it. This prevents lateral water migration and waterproofing performance

is unaffected by ground settlement beneath slabs.
• Fully-bonded watertight selvedge laps and detailing.
• Provides complete barrier to water, moisture and gas.
• Zero permeance to moisture.
• Solar reflective, being white in colour thereby reduce temperature gain.
• Very easy and efficient to install, does not require primer or fillet.
• Self protecting – reinforcement can start immediately after installation.
• Unaffected by wet conditions - cannot activate prematurely.

All Surfaces
It is important to prepare sound and solid substrate for installation of membrane to eliminate movement during the concrete pour.

Substrates must be uniform and smooth and there shall be no gaps or voids in surface greater than 12mm.
Horizontal Concrete Blinding or PCC
The substrate must be smooth and uniform and shall be free of all unsound aggregate and sharp lumps. Curved or rounded substrates

should be avoided. Standing water must be removed.
Vertical Sheet Piling
HDPE membrane (non-sand finish) can be used for blind side waterproofing after either using guniting, concrete, or plywood or other

suitable material to provide uniform surface for membrane installation.
Membrane Installation
HDPE membrane should be overlapped using steel roller to ensure complete bonding and to achieve continuity.